If you're like me you spend a lot of time trying to figure out an easier, faster way of doing things that bore you. Don't get me wrong, I love to crochet and I love to sew - on the machine - hand sewing is not my favorite, or fastest thing to do. It takes me what seems like forever to hand sew a lining in one of my bags.
I had a thought, tried it, and it worked just fine. The thought came when I was hand sewing lining into a Fat Bottom Bag. I thought, "There's GOT to be an easier and faster way to do this! What would Mom do?" That's when the thought came to me. Mom would have used Freezer Paper and sew it on the machine!
The problem I had when trying to sew the lining with the machine before this was unfruitful. It came out horrid because the pressure foot kept tugging and catching on the crochet work I did and the thread would all bunch up making one hundred stitches in the same exact place - the work would not move forward.
All I had to do was put freezer paper between the pressure foot and the crochet work and TA DA! No more catching, bunching, and each stitch went exactly where it was supposed to, one right after the other in a neat line. Yea. Thanks Mom!
You'll need:
Freezer paper, or Parchment paper would work just the same
The fabric lining for your bag (or other crocheted item)
Your crocheted bag
A sewing machine
Several of you have asked about stitch length....
**Set your stitch length to one you would use for everyday, medium weight fabrics.** I haven't tried a zig zag stitch yet, nor have I tried a top stitch setting (where the machine makes a triple stitch) but I'd like to try and I'll let you know how it turns out.
Just put the paper next to the teeth that push the material along (for which I cannot remember the real name of at this moment! ack!) , under the presser foot. The place your work, with the fabric lining pinned into place, on top of the freezer paper, underneath the presser foot as well.
As long as you don't go off the fabric, don't stray onto the crocheted part of your work, this trick should work just fine.
Once the lining is sewed in, just remove the paper, one side at a time, tearing it carefully away from the machine stitching.
(I don't have an example shot just yet of this action because I didn't think to share this with you until I was all done with this bag but next one, if need be, I'll post the photo of actually pulling the paper away from the stitches. For now, this is what it looks like to pull the paper away from stitches I made in an hand towel. lol)
It's best to do one side and then the other to make sure you don't pull any stitches too hard and pull them out. Any little bits of paper that may stay stuck in the stitches of your work can easily be pulled out with your fingernails or tweezers, but I don't find that very many little bits are stubborn this way, they mostly come out when you pull the paper away.
That's It! I hope this made something easier and quicker for you. I do like the results of hand sewing my linings in my bags but when it comes to being cost effective for a boutique sale or craft fair, machine sewing is the only way to fly. We spend enough hours on our crocheting - my doctor figured out I get about 12 cents per hour for my crochet work at the prices I sell my items for. Save time, save money, save your fingers, save yourself. Use the machine whenever you can! ;-D
If you found this post to be useful, please indicate by leaving a comment below. Also, if you found it to be boring or dumb, please feel free to say so. I like to share my secrets but don't want to if I find out everyone already knows everything! lol
Do you have a question about crocheting or sewing that we can help answer for you? Is there something that's been on your mind that you've always wondered about either of the two? Let me know in the comment section below and I'll see what we can do to find the answer for you. Maybe it's something you just discovered yourself, put that in the comments too and I'll create a post for and by my readers that shares tips like this one (without the photos and extreme explanations). It would be nice to help each other by sharing our knowledge, don't you think? It'll be kind of like Heloise's book of household tips except it'll be this blog and about crocheting. We'll see. Maybe we could get together a book like that - I don't believe there is one out there. We'll see.
Gotta go!
Have a great day, God bless you!
Free crochet patterns, ideas, tutorials, and a few recipes just for kicks and giggles
Tuesday, July 17, 2012
Thursday, July 5, 2012
Crochet Pattern: Snapdragon Bag
Free Crochet Pattern:
Snapdragon Bag
by Cynthia J Luciene aka anitalite copyright July 5, 2012
Please link to this page to distribute this pattern. It may not be sold by you, however, you may sell whatever you make using this pattern.
With worsted weight yarn and a "J" size hook, ch 32
Round 1: sc in 3rd ch from hook and in each ch across, making a total of 5 sc in end ch, turn clockwise and working in the unused loops of beginning chs, sc in each ch across, work 4 sc in end ch and sl st to 1st sc to join. (38 sc total)
Round 2: ch 1, sc in each sc up to last two sc on same side. 2 sc in next-to-last and end sc (middle sc of 5 sc group from prev round) then still working in the round, sc in rem sc to last two. 2 sc in next-to-last and 2 sc in end sc as mentioned prev. sl st to 1st sc to join. (42 sc)
Rounds 3 and on: Continue same as Round 2 until there are 80 sc all the way around once.
(Continue to work in the round for the following rows:)
Round 6: ch 5, dc in same st as ch 3 (beg v-stitch made), *skip 2 st. 5 dc in next st (shell made), skip 2 st, v-stitch in next st; repeat from * around until last v-stitch then skip 2 st, shell in next, join to top of ch 3 with sl st to join.
Round 7: sl st into next ch 2 space (middle of v-st), ch 3, 4 dc in same ch 2 sp (beg shell made), *v-stitch in middle dc of next shell, shell in next v-st - continue around from * until last shell then v-st in middle dc of next shell, join with sl st to top of beg ch 3 to join.
Rounds 8 and on:
Continue following stitch pattern in order Rounds 6 and 7 until bag is desired size. (For the bag shown, 10 rounds of the snapdragon stitch pattern were used.)
Fasten off, weave in ends.
For Handles As Shown:
(Of course you can use any handle you prefer, I thought fancy cording would also work well with this bag, I just didn't happen to have any on hand.)
Attach (with a sl st leaving a long - 10 " tail) worsted weight yarn to either side where you'd like the handle to be placed. ch 3, dc in same stitch as ch 3, ch 2, 2 dc in SAME stitch. turn.
Row 2: sl st to ch 2 sp, ch 3, dc, ch 2, 2 dc in same ch2 sp; turn.
Rows 3 and on: repeat row 2 until desired length is achieved. If you want the open shells in the handle to all face upward instead of having one side of the handle with shell st up and then going down on the opposite side, just make your handle half as long as you really want it and then fasten off. Attach to opposite side in the manner stated at the beginning of handle instructions and follow the directions from there. When both sides of your handle are even just slip st together the ends that meet in the middle. I used a longer tail than I normally do so I'd have plenty of yarn to weave in, assuring the handle won't pull apart with weight inside the bag as it's being used.
Closure:
I simply attached the worsted weight yarn to the middle-est stitch of the bag and made a ch long enough to go around an old vintage button I had from one of my mother's old coats. Then I back-tracked on the ch with sc all the way to where I attached it. I did use a bit extra of a tail here too, to ensure it wouldn't unravel with use. This tail was about 10" long as well. (Probably a bit overkill but better safe than sorry, right?)
Hope the directions are okay. If you have any questions please comment below and I'll get back to you asap. Thanks and have a wonderful day and fun making this bag. I found it to work up quickly and the snapdragon stitch gives it a very fancy look without being a complicated stitch pattern. I am very happy with the results, are you?
God bless you and yours. God bless America
Snapdragon Bag
by Cynthia J Luciene aka anitalite copyright July 5, 2012
Please link to this page to distribute this pattern. It may not be sold by you, however, you may sell whatever you make using this pattern.
With worsted weight yarn and a "J" size hook, ch 32
Round 1: sc in 3rd ch from hook and in each ch across, making a total of 5 sc in end ch, turn clockwise and working in the unused loops of beginning chs, sc in each ch across, work 4 sc in end ch and sl st to 1st sc to join. (38 sc total)
Round 2: ch 1, sc in each sc up to last two sc on same side. 2 sc in next-to-last and end sc (middle sc of 5 sc group from prev round) then still working in the round, sc in rem sc to last two. 2 sc in next-to-last and 2 sc in end sc as mentioned prev. sl st to 1st sc to join. (42 sc)
Rounds 3 and on: Continue same as Round 2 until there are 80 sc all the way around once.
(Continue to work in the round for the following rows:)
Round 6: ch 5, dc in same st as ch 3 (beg v-stitch made), *skip 2 st. 5 dc in next st (shell made), skip 2 st, v-stitch in next st; repeat from * around until last v-stitch then skip 2 st, shell in next, join to top of ch 3 with sl st to join.
Round 7: sl st into next ch 2 space (middle of v-st), ch 3, 4 dc in same ch 2 sp (beg shell made), *v-stitch in middle dc of next shell, shell in next v-st - continue around from * until last shell then v-st in middle dc of next shell, join with sl st to top of beg ch 3 to join.
Rounds 8 and on:
Continue following stitch pattern in order Rounds 6 and 7 until bag is desired size. (For the bag shown, 10 rounds of the snapdragon stitch pattern were used.)
Fasten off, weave in ends.
For Handles As Shown:
(Of course you can use any handle you prefer, I thought fancy cording would also work well with this bag, I just didn't happen to have any on hand.)
Attach (with a sl st leaving a long - 10 " tail) worsted weight yarn to either side where you'd like the handle to be placed. ch 3, dc in same stitch as ch 3, ch 2, 2 dc in SAME stitch. turn.
Row 2: sl st to ch 2 sp, ch 3, dc, ch 2, 2 dc in same ch2 sp; turn.
Rows 3 and on: repeat row 2 until desired length is achieved. If you want the open shells in the handle to all face upward instead of having one side of the handle with shell st up and then going down on the opposite side, just make your handle half as long as you really want it and then fasten off. Attach to opposite side in the manner stated at the beginning of handle instructions and follow the directions from there. When both sides of your handle are even just slip st together the ends that meet in the middle. I used a longer tail than I normally do so I'd have plenty of yarn to weave in, assuring the handle won't pull apart with weight inside the bag as it's being used.
Closure:
I simply attached the worsted weight yarn to the middle-est stitch of the bag and made a ch long enough to go around an old vintage button I had from one of my mother's old coats. Then I back-tracked on the ch with sc all the way to where I attached it. I did use a bit extra of a tail here too, to ensure it wouldn't unravel with use. This tail was about 10" long as well. (Probably a bit overkill but better safe than sorry, right?)
Hope the directions are okay. If you have any questions please comment below and I'll get back to you asap. Thanks and have a wonderful day and fun making this bag. I found it to work up quickly and the snapdragon stitch gives it a very fancy look without being a complicated stitch pattern. I am very happy with the results, are you?
God bless you and yours. God bless America
Subscribe to:
Posts (Atom)
